Results 1 to 2 of 2

Thread: HP LaserJet 4 Paper Feed Asbly Install

  1. 01-03-2010, 03:42 PM #1
    Russell Ranson
    Russell Ranson is offline Junior Member
    Join Date
    Jan 2010
    Posts
    1

    Default HP LaserJet 4 Paper Feed Asbly Install

    Am trying to install Paper Feed Assembly you sold me some time ago in HP LaserJet 4. You sent me partial pictorial instructions, evidently for GovTechMedia, but they do not include Figures 6-6 or 6-7 or 6-9 through 6-15 or anything after 6-18 which might answer my questions as follows:

    1 How do I remove the MP Tray (Tray 1) door?

    2 How do I remove the 13-wire connector and the 4-wire connector from
    the front of the Paper Feed Assembly per Figure 6-16 callout 1? Do I just
    pull forward on the wires or do I have to release something on the plug
    asbly?

    Thanks, Russell
    Last edited by Russell Ranson; 01-03-2010 at 03:49 PM.
    Reply With Quote Reply With Quote
  2. 01-03-2010, 08:38 PM #2
    cs_steve
    cs_steve is offline Super Moderator
    Join Date
    Dec 2006
    Posts
    737

    Default

    If you bought it from PrinterTechs, you can give us a call and we'll send you more instructions ... 866-352-7108

    Are you meaning a LaserJet 4, or a LaserJet 4000? The paper feed assembly rarely fails in a LaserJet 4, but it does get replaced a lot in 4000/4100 series.
    Last edited by cs_steve; 01-03-2010 at 08:40 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules