Results 1 to 2 of 2

Thread: hp 4500 TN

  1. 05-09-2006, 10:24 AM #1
    Drake
    Drake is offline Junior Member
    Join Date
    May 2006
    Posts
    1

    Default hp 4500 TN

    I have a 4500 tn printer that prints standard paper (8.5 X 11) fine. When I attempt to print cardstock (4 X 6) it stops when it hits the fuser. I took the machine apart and thourghly cleaned the printer. I noticed that the two belts located in front of the fuser were loose and worn. I believe this to be my problem. Does any one have any input to this problem and a part number that I could use to order the belts.
    Thanks
    Drake
    Reply With Quote Reply With Quote
  2. 05-15-2006, 01:51 PM #2
    MichaelTech
    MichaelTech is offline Senior Member
    Join Date
    Jul 2004
    Location
    Simi, Ca.
    Posts
    725

    Default Card stock

    I assume you are using the tray 1 for this media. Is it within HP's specs?
    175 g/m {47 lb. bond}
    As for the belts, they are always a little slack, and you have to but the entire transport assy. PN# RG5-5117
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules