Make sure the ethernet cable going from the printer to the switch is connected to a port on the switch that is working. Some old Linksys switches had uplink connectors that don't behave the same as...
Type: Posts; User: ptjeff1
Make sure the ethernet cable going from the printer to the switch is connected to a port on the switch that is working. Some old Linksys switches had uplink connectors that don't behave the same as...
looks like a bad toner cartridge
I use a Laserjet 4100 with envelope feeder. Some envelopes will crease just by the paper type and envelope design. I use Top Flight, Inc. Number 10 security envelopes with a strip seal. I think they...
I'm assuming you tried a different toner in the yellow slot and got the same result?
Our lead tech is on vacation right now otherwise I'd ask him if he has seen this; we usually find these are...
My first thought is that it is a sticking solenoid for the tray 2 pickup assembly, not the paper size pca.
I guess printers are dead...
or disposable.
You have a question?
It sounds like you went through a lot of good troubleshooting. Humidity was my first thought. Make sure you are setting the humidity compensation under the right paper type. Administration>general...
That looks like a toner problem. Maybe 2 bad toners or check the toner contacts in the printer to make sure they touch the metal contacts on the toner cartridge.
It would help if you told us what you are trying to do. It seems like you don't want the toner to fuse completely. Removing the pressure roller means you'll likely get a paper jam; in most printers...
Whatever you do, don't try to clean the transfer roller with any liquids, only use compressed air or a dry cloth.
Try a half-way test...
Yes, probably the laser scanner.
Lan hardware address is the mac address, sometimes it is printed on the barcode on the card
We had a customer trying to figure out a 13.A2.FF error in an HP M60x series, also gave a 13.FF.FF error. The 13.A2.FF error code isn't listed in the service manual, other sites suggest paper or dust...
Does the memory count up and do you see the HP logo on the screen?
If there is a Jetdirect card or extra memory installed remove them and power up to see if the problem goes away.
The first thing to test is to make sure the memory is good, also remove the Jetdirect card if there is one installed, if there is a firmware dimm that would also need to be checked.
OK, I just deleted hundreds of spam posts, and because of that we will have to take the step to approve all new members. All new users will be placed into a validation queue for approval before they...
I've been meaning to reply to this post for a while...I wasn’t aware that there were any doubts in the printer tech community regarding the metal gear.
This is a rough sketch showing how the...
FYI there is only one OEM -- HP. Most aftermarket transfer rollers for these models are notorious for poor print quality when duplexing.
yes, and yes...the factory defaults were restored and nvram reset with no effect. The key here is printing an engine test, which in this case was perfect, pointing to the formatter.
just posting this to help anyone else who might see this problem. It has to do with color registration problems in the HP color laserjet CM2320 series, CM 2320fxi mfp, etc.
People would probably...
Hi Stewart -- we have tested our metal swing plate gear to over 1 million pages worth of use. At 1 million pages the gear still worked flawlessly. The teeth started to show some minor wear but I...
Formatters on the P2015 have been a high failure part, my advise is to replace the printer. Formatters are generally $100+. If you really like the design of the P2015 consider the previous model the...
many people describe the laser scanner spinning up as a jet-like sound. You could try replacing the scanner, but they all make some noise.
In know this is sarcastic, but a Deskjet 6940 is a $99 printer. I wouldn't have high expectations. I didn't search very hard but it wouldn't surprise me if this were a host based printer, which...
You can view the page at http://printertechsforum.com/forum/content.php?93-Managing-CMS-Section-and-Content