Tray 2 is full of paper however the display says to load paper in tray 2. Any suggestions on fixing something like this?
Printable View
Tray 2 is full of paper however the display says to load paper in tray 2. Any suggestions on fixing something like this?
Pull out tray, and look at the P\U roller, to the right of it is the sensor flag.
Test it's motion, and re-set it if need be. Otherwise, the sensor may be bad, order PN# RB2-6304. Remove the P\U assy, and it will be under it on the frame. The cable, J2002 connects to the ECU.