taxbgone
02-19-2006, 11:36 AM
Paper feeds from tray 2 but no toner deposits onto paper prior to entering the fuser. Printer stops and indicates a paper jam--paper is 1\2 way thru the fuser at this point with no toner on the sheet.
When using tray 1 the paper feeds, gets toner, fuses and exits just fine. Have replaced all the rollers and separator pad. Took tray 2 to another 4050 and it feeds just fine. any ideas to cure?
When using tray 1 the paper feeds, gets toner, fuses and exits just fine. Have replaced all the rollers and separator pad. Took tray 2 to another 4050 and it feeds just fine. any ideas to cure?