View Full Version : HP 4050 shows Tray 2 open when Tray 2 paper tray is in the printer
rmellnick
02-01-2017, 03:46 PM
Getting Tray 2 open on the display but the paper tray is inserted into printer, I've tried multiple trays still same error.
Is this an indication that the tray 2 paper out sensor is not working correctly?
Thanks
Russ
cs_steve
02-02-2017, 03:42 PM
Getting Tray 2 open on the display but the paper tray is inserted into printer, I've tried multiple trays still same error.
Is this an indication that the tray 2 paper out sensor is not working correctly?
Thanks
Russ
That issue should be failure with either the feeder control PCA or the corresponding plastic fingers that are in front of that PCA. If you pull Tray 2 out, look deep inside the cavity on the right hand side. If you have the single tray 4050 (not the 4050T or 4050TN) these are easy to replace. We carry both parts at PrinterTechs, 866-352-7108.
Here's a link to the feeder control PCA on our Web site, the other part is not listed on our Web site:
http://www.printertechs.com/shop/rg5-2673-feeder-control-pca-for-hp-laserjet-4000-4050-4100-single-tray-models-refurbished
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.