PDA

View Full Version : Protection Fault Xerox Work Center M15i



coreyhalliwell
06-27-2005, 10:46 AM
When trying to print to a printer at work, a user experienced an error stating" "Function address 0x35c2eb6 caused a protection fault. (exception code 0xc0000094) The application property sheet page(s) may not function properly". This error comes up when users try and open the page properties of the print job. Ive tried re-installing the printer on the print server and have had no luck. Has anyone heard of / had this problem?

ricecomputersolutions
08-07-2006, 04:10 PM
Did you resolve this problem, and if so how

MichaelTech
08-21-2006, 03:21 PM
While the driver is an installed item, it still relies on the info from the unit's NVRAM, and configuration card. Re-seat any chips, and the config. card, and re-seat the formatter . Use Centreware IS {download from Xerox} to check network troubles. You can try cleaning up the NVRAM through the control panels service menu.