derekgw
07-09-2004, 11:14 AM
Hello!
I have a Laserjet 6p here that has a little tiny piece of paper stuck in it that's preventing paper from feeding from either tray 1 or 2.
I'm not too familiar with printer jargon so I'll attempt to explain the area as best I can.
If you take a 6p, remove Paper Tray 2, and flip it over with the front of the printer facing you you'll see a roller towards the right which is what mainly guides the paper up. The bit of paper is stuck right up in there.
It's one of those things where I know if I could just take it apart I could grab that bit of paper easily, put it back together and everything would be fine again. I just have no clue how to accomplish that. I know it must be possible because this roller looks like it's replaced in a maintenance kit (which this printer may need anyway)
Is there, by chance, a service guide for this printer online anywhere?
I have a Laserjet 6p here that has a little tiny piece of paper stuck in it that's preventing paper from feeding from either tray 1 or 2.
I'm not too familiar with printer jargon so I'll attempt to explain the area as best I can.
If you take a 6p, remove Paper Tray 2, and flip it over with the front of the printer facing you you'll see a roller towards the right which is what mainly guides the paper up. The bit of paper is stuck right up in there.
It's one of those things where I know if I could just take it apart I could grab that bit of paper easily, put it back together and everything would be fine again. I just have no clue how to accomplish that. I know it must be possible because this roller looks like it's replaced in a maintenance kit (which this printer may need anyway)
Is there, by chance, a service guide for this printer online anywhere?