johnbla
04-18-2012, 04:53 PM
Hi
Having a problem with an Old Epson Impact Tractor feed
if you send a print job to it or run it in the test mode, after ten or so sheets have fed through the printer stops printing, but the ribbon continues spooling, however it does not print, have to turn the printer off and back on to clear it. No error lights, no beeps, just stops printing, but the ribbon is still spinning.?
Any thoughts.............
I have come across several posts on this subject around the various Tech Forums, but no one seems to have an answer..
regards
JohnBla
Having a problem with an Old Epson Impact Tractor feed
if you send a print job to it or run it in the test mode, after ten or so sheets have fed through the printer stops printing, but the ribbon continues spooling, however it does not print, have to turn the printer off and back on to clear it. No error lights, no beeps, just stops printing, but the ribbon is still spinning.?
Any thoughts.............
I have come across several posts on this subject around the various Tech Forums, but no one seems to have an answer..
regards
JohnBla