View Full Version : HP 4200 with no display.
drthtater
01-11-2012, 09:31 AM
I'm a new tech to this site, and they give me a printer that has no display to work on. It has power, as the fans turn when I flip the switch, but I get no display and no lights. I've replaced the DC controller board, as well as tested with a known good display/cable.
I still get nothing on the display.
Suggestions?
cs_steve
01-11-2012, 05:57 PM
Sounds like a problem with the formatter board.
Swap DIMM / memory & formatter board with known working machine.
We carry formatters at PrinterTechs if needed, 866-352-7108.
ridered74
01-11-2012, 11:08 PM
Or replace the LCD panel. That's a pretty common problem with 4200's.
drthtater
01-23-2012, 08:46 AM
Sounds like a problem with the formatter board.
Swap DIMM / memory & formatter board with known working machine.
We carry formatters at PrinterTechs if needed, 866-352-7108.
As it turns out, it was the DIMM. Swapped it with a good DIMM, and it worked.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.