hp 8150n problem

[bouka]

the printer show 50.1 error fusing unit. I have been test the fusing unit on other 8150 printer and it work... I look around on the web and the only thing i can found about the error 50.1 is to replace the fusing unit. If it not the fusing unit what else should i look to repair the printer

Please help

[theroo]

hello

Try and plug the printer into another power point..Also check that the connectors [where the fuser goes in are ok and have no paper jammed in them]
. If that doesn't work it could be a power supply.....

Let me know how you go.

The roo

[bouka]

test on other power point.
there is no paper jam.
still not work

as you said it could be the low voltage power supply do you know where i can find ebook or a step by step to replace it

[theroo]

Hi

Take the fuser out..if you look where the fuser connects into the printer.
[male plug from fuser,into female plug on the printer] sometimes little bits of paper can get stuck in the connectors...
You should try this before you replace the power supply [much easyer]
I will have a look for instructions to take out power supply

The roo

[ptjeff1]

This is very common. If the fuser tests good in another printer then 99% of the time its the low voltage power supply on the 8100 or 8150. Replacing it is not that big of a deal.

[bouka]

Thank fo help it work no more problem with the 50,1 fusing error by replacing the low volatage power supply


but now something happen when i print i alway have a string of pale character in the same area of my sheet I try a brand new tonner cartdrige but the problem remain. Doe's it have a link with the LVPS replacement


Any idea

Thank