4650dn Errors (Event Log) 54.0C / 54.0D

[Compman55]

I have no problems printing now that I replaced the doctor blades on the toners. Everything comes out very nice. Any reason why I keep getting 54.0D and 54.0C density codes?


50 37190 54.0D Density sensor out of range.
49 37180 54.0D Density sensor out of range.
48 37180 54.0C Density sensor out of range.
47 37175 54.0D Density sensor out of range.
46 37170 54.0C Density sensor out of range.
45 37162 54.0C Density sensor out of range.
44 37160 54.0D Density sensor out of range.
43 37163 54.0D Density sensor out of range.
42 37163 54.0C Density sensor out of range.
41 37160 54.0C Density sensor out of range.
40 37150 54.0D Density sensor out of range.
39 37150 54.0C Density sensor out of range.
38 37141 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
37 37133 13.12.00 DUPLEX PATH, PAPER LATE JAM
36 37130 54.0C Density sensor out of range.
35 37133 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
34 37132 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
33 37120 68 3D07
32 37120 68 3D03
31 37120 68 3D0D
30 37120 68 3D02
29 37120 68 1C40
28 37120 68 1C3F
27 37120 54.0C Density sensor out of range.
26 37100 54.0C Density sensor out of range.
25 36956 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
24 36953 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
23 36950 54.0C Density sensor out of range.
22 36941 54.0C Density sensor out of range.
21 36931 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
20 36930 54.0C Density sensor out of range.
19 36930 54.0D Density sensor out of range.
18 36930 54.0C Density sensor out of range.
17 36895 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
16 36894 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
15 36897 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
14 36896 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
13 36895 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
12 36880 54.0C Density sensor out of range.
11 36889 13.20.00 PRINTER COULD NOT AUTOMATICALLY EJECT PAPER
10 36889 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
9 36887 13.20.00 PRINTER COULD NOT AUTOMATICALLY EJECT PAPER
8 36887 13.0A.00 TOP OUTPUT BIN, PAPER STOPPED JAM
7 36887 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
6 36885 13.20.00 PRINTER COULD NOT AUTOMATICALLY EJECT PAPER
5 36885 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
4 36802 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
3 36800 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
2 36798 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM
1 36796 13.09.00 TOP OUTPUT BIN, PAPER LATE JAM

[Big Al]

The laser beams travel through the printer on clear plastic light pipes. The beams come out near the toner cartridge then jump over to the port on the cartridge. A good bath with compressed gas might clear this up. The ports are usually on the left side of the printer as you are facing the front of the printer.

Al

[Compman55]

I used a q-tip to clean the LED on the left and right side of the printer, and also the tube on the toner. The LASER SCANNER actually shoots from a slot at the back of the printer rather. I beleive the ERASE beam is on those optic tubes you refer to.

I also cleaned the color registration sensor. I guess we will see......

[Compman55]

No dice. Still 54.0D coming up.