PDA

View Full Version : HP 8150 Refurb.



Campster
03-26-2005, 04:49 PM
Is there any information I can attain about refurbishing my own HP 8150?

My department has been graced by the opportunity to upgrade from our HP 8000DN (the best die-hard printer i've ever delt with) to a used 8150. I've been pushing for upgrades in my department, they budged and I get a slightly newer model. But there's a catch, I have to refurbish it myself to make the upgrade worth it and cost efficient. I have an HP maintenance kit (off Ebay), so I don't need to rebuild the fuser or anything like that. Just everything else.

Is there a book I can get, or website I can go to?

-Chris

mattchall
03-28-2005, 09:34 AM
The PM kit should contain the fuser, transfer roller, paper feed rollers and sep pads you need to "refurbish" the printer. Other than cleaning, you shouldn't need to do anything else unless the machine is giving an error message or has an additional fault not mentioned.

ptjeff1
04-02-2005, 03:19 PM
The standard maintenance kits from HP only include the fuser, transfer roller and feed rollers. You will also want to replace the manual feed tray pickup roller and separation pad, the pickup rollers for the lower trays, and if you really want to be thorough rebuild the paper input unit.