PDA

View Full Version : Hp4300 -reset maintanance count



i_love_hp
03-09-2005, 06:39 PM
Hi - Got a client with a HP 4300 - 200k maintanance kit has been installed but the page count since maintanance has not been reset. How do you do this?

cheers :)

Placebo
03-09-2005, 08:12 PM
http://www.printertechs.com/tech/maintcount.php

i_love_hp
03-09-2005, 08:32 PM
thanks Placebo but that does not include instructions for the hp4300.

Brian
03-10-2005, 09:12 AM
Press and hold the “Select” key while powering ON the printer, until all three lights flash once and then remain on. Then release the key. At this point, the display should read “Select Language.” Use the ‘up arrow’ or ‘down arrow’ key to scroll to “New Maintenance Kit” and select it. The printer will perform the reset and then go into its normal power on initialization and warm-up.

You can also go into the service menu and edit the maintenance count, but you'll need the PIN code for that (11430002)

Good luck

Placebo
03-11-2005, 01:22 PM
My apologies, I thought the procedure was the same.

i_love_hp
03-29-2005, 09:49 PM
Thanks Brian - all fixed :)

Brian
03-30-2005, 08:49 AM
You're welcome, we aim to please :D