View Full Version : Ricoh SP811DN
Tim Keith
10-20-2009, 10:19 AM
Has SC-529 error code. I do not have manual. Anybody know what this code refers to?
pbbsinc
10-26-2009, 01:48 PM
SC-529: Junction gate 1 motor error
The junction gate 1 HP sensor does not detect the home position of
junction gate 1 for 0.15 seconds when the machine starts to detect its
home position.
The junction gate 1 HP sensor does not turn off for 0.15 seconds after
the machine has detected its home position.
Disconnected or defective junction gate 1 motor
Disconnected or defective junction gate 1 HP sensor
Mechanical problem (such as paper jam etc.)
Shorted 24 V fuse on the PSU
Defective IOB
1. Remove any objects that obstruct junction gate 1.
2. Replace the junction gate 1 HP sensor.
3. Replace the junction gate 1 motor.
4. Replace the 24 V fuse on the PSU.
5. Replace the IOB.
choco
11-04-2009, 07:53 AM
very useful info, pbbsinc.
i think i have experienced this one, with a friend's ricoh too. and i didn't know how to fix it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.