ImaginaryNumber
03-12-2009, 10:41 AM
Hello all,
On my Oki B4350 printer I am getting error messages "Check Image Drum" and "Drum Missing". Printer goes through start-up okay (RAM check; Initializing; Online Auto; Warm-up). Then the printer tries to drive the drum assembly, and it sounds like there are gears grinding -- maybe? Very difficult to turn the drum assembly manually. Took the whole drum assembly apart, cleaned, tried to relubricate, re-assembled. Still seems to rotate very stiffly (but I've never taken a printer apart, so I don't have anything to compare to), and I still get the error messages.
Any suggestions appreciated. Thanks
Imaginary Number
On my Oki B4350 printer I am getting error messages "Check Image Drum" and "Drum Missing". Printer goes through start-up okay (RAM check; Initializing; Online Auto; Warm-up). Then the printer tries to drive the drum assembly, and it sounds like there are gears grinding -- maybe? Very difficult to turn the drum assembly manually. Took the whole drum assembly apart, cleaned, tried to relubricate, re-assembled. Still seems to rotate very stiffly (but I've never taken a printer apart, so I don't have anything to compare to), and I still get the error messages.
Any suggestions appreciated. Thanks
Imaginary Number