PDA

View Full Version : 3600: can you overide the toner replacement message for a color of toner?



pbjjbj
01-15-2009, 10:03 AM
is there a way to overide and continue to print in black when a color toner runs out?

cs_steve
01-15-2009, 02:26 PM
You can put the printer into a mode called "Disable cartridge check" mode ...
this will cause the printer to ignore any consumable supply errors...

1. Press "Menu" to open the menus ...
2. Press Down Arrow until you come to "Diagnostics", the press checkmark.
3. Press Down Arrow until you see "Disable Cartridge Check", and then press Checkmark.

With this mode, you can actually remove any cartridges you wish from the machine and run the print jobs with just the installed cartridges ...

This mode is intended to be a temporary diagnostic test mode ... to exit this mode and turn back on the consumable warnings, press "Stop" and then select "Exit Diagnostics" ..