PDA

View Full Version : HP4 Plus with JetDirect issues



oldretailer
12-18-2008, 02:46 PM
I'm trying to network my 4Plus but when I install the JetDirect card the printer gives the following error: 80 Service 01E4. I've tried cold booting, and a different card but it continues to hang up. Removing the card lets the printer boot up and print normally as a stand-alone. Any help? 2 bad cards?
Thanks for your time.

o.r.

Big Al
12-18-2008, 03:07 PM
This is a classic bad NIC error. Might also be the formatter. Any way you could get someone else to check these cards? On rare occasions we have done a cold reset without the NIC, then power it down and put in the NIC and do a second cold reset. Send me a private message and I will send you one, have several that I will probably never use.

Al

oldretailer
12-28-2008, 04:01 PM
I just wanted to publicly thank Al for his support and generous offer. He sent me a card which is working fine. He sent this to me free of charge, and while I appreciate that, it's the fact he took the time and effort to do so that really earned my thanks.
Thank you Al! :D

o.r.