View Full Version : HP 5si envelope feeder
jkopping
04-23-2008, 11:57 AM
My envelope feeder is not picking up envelopes consistently. Is there away to change the rollers?
Big Al
04-23-2008, 01:34 PM
We no longer service 5si printers in my shop. There is a product called OOPs that is an alcohol solvent with some other stuff in it. Hardware stores and home centers usually have it. It seems to renew the rubber somewhat. Alcohol with a little baby oil might work too. You can probably print the 5si handbook off the Internet but it will be a very big print job. http://partsurfer.hp.com and printerworks.com can provide you with illustrated parts breakdown diagrams.
Big Al
redcow
04-24-2008, 02:43 AM
Clean the rollers and give the assembly a general cleaning. Slide an envelope in and out of the feeder to make sure the gap isn't too tight.
prntrfxr
04-24-2008, 09:55 AM
part numbers for all the rollers i replace when i rebuild them are:
RB1-8063
RB1-8064
RF5-1700
RB1-8062
RB1-8061
RA2-1582 - TORQUE LIMITER
RF1-3548
I'm not supposed to promote myself here so cant give you more that above.
:)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.