BIJ 1200n

[MichaelTech]

My turn to ask a question!
Unit will not print to the bottom margin. Stops 1/2 in. from a .05 margin.
Re-setting the drivers, etc, no good. Rollers are very clean, and paper advance is correct. P/Q is perfect. No errors.
Firmware is upgraded to 20061123 MMR2021K
Letter size, Top and side margins are correct.

[redcow]

Is the printer capable of printing <.5" from the bottom of the page?

[MichaelTech]

Sorry for late reply redcow, I took another unit off the shelf, and worked on it for a swap. The margin issue seems to be the formatter. It would print to the .05, and then it would not. Printer is pretty worn out anyway.