View Full Version : HP 5500 print skewed
jkelly
12-05-2007, 12:12 PM
Hello, I have a HP 5500 that looks like it is not calibrating properly. Blury print. I have changed the fuser, transfer belt all toners and tried to calibrate but no luck. Anyone have any idea what it could be.
try cleaning out the cartridge slots and contacts.or try cleaning the color registration density sensor.it runs across the top above the top of the ITB when it's in the closed position,just above it.there should be a couple of small "windows" on it with 2 small brushes.after cleaning it,try some calibrations.sometimes if the scanners get far enough out of alignment it can cause this type of thing.
jkelly
12-06-2007, 10:55 AM
Thanks I will give that a try.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.