HP 4250 Series Fuser

[nvl51]

Can anyone tell me what the operating temperature is for the 4250 fuser heating element.

Thank You

[MichaelTech]

It's at 675W printing, ready state is at 20W. At 10 amps
This is for 110V.
Try PartsNow.com for fuser checks.

[ptjeff1]

Look in the service manual.
There is a range around 230°C (446°F) which is what the paper should be rated for; if temps exceed 240°C (464°F) the printer should throw a 50 error.