PDA

View Full Version : LJ4100 with ghosting



fhaller
02-20-2007, 09:05 AM
I have an LJ4100 that is ghosting the printed image about every 1/4 page. I have replaced toner and fuser (i have several of these and made a switch) with not much sucess. :mad: The HP site says that the EP drum is responsible, but gives no solution. Any thoughts?
________
MERCEDES-BENZ OM615 SPECIFICATIONS (http://www.mercedes-wiki.com/wiki/Mercedes-Benz_OM615)

redcow
02-20-2007, 10:34 AM
Print a bunch of pages, as its printing open the top cover. Pull the toner out. Look at the sheets inside the paperpath. Hold them by the edges(the toner hasn't been fused). If the sheet going into the fuser has the repeat image, replace the xfer roller or toner. If the sheet coming out from under the toner has the repeat image, its the toner. If both the sheets are good, it's got to be the fuser.

fhaller
02-20-2007, 11:55 AM
follwed advice, saw it there. Pulled the fuser and see some damage to roller - must be the issue! thanks:) :) :) :)
________
IOLITE PORTABLE VAPORIZER (http://vaporizers.net/iolite-vaporizer)