Results 1 to 2 of 2

Thread: Hp2015DN manual feed tray fails

  1. #1

    Default Hp2015DN manual feed tray fails

    Have a 2015DN that runs fin, does duplex ok, but when you put a sheet of paper in the manual feed tray it won't pick the paper and the ! error light blinks. If you push the "go" button it trys to work anf the error lamp lights. Any ideas? Could the tray 1 solenoid be stuck or dead, or the tray's sensor switch be goofy?

  2. #2

    Default

    Quote Originally Posted by Fr. Frog View Post
    Have a 2015DN that runs fin, does duplex ok, but when you put a sheet of paper in the manual feed tray it won't pick the paper and the ! error light blinks. If you push the "go" button it trys to work anf the error lamp lights. Any ideas? Could the tray 1 solenoid be stuck or dead, or the tray's sensor switch be goofy?
    If the roller isn't spinning (you can watch it when you fold down the manual feed tray) then yes, something is off with either the solenoid or the drive mechanism for manual feed roller. Solenoids pretty much never die but could be stuck. If you hear the clicking of it trying to lift, spin, etc. then the tray sensor is ok, because it won't even attempt if the sensor does not detect paper.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •