Results 1 to 4 of 4

Thread: hp5035 multifunction

  1. #1
    Join Date
    Aug 2009
    Location
    Southern Indiana (close to Louisville,KY)
    Posts
    2

    Question hp5035 multifunction

    puts out (totally) blank prints from doc feeder &platen glass. No print on pages from internal printouts too. Also has event code of 10.50.10 plus 2 other 10 codes. 10.50.10 refers to lack of communication with printer cartridge
    have tried new cartridge, marking drum (does rotate), RnR arm for cartridge communication etc.

    Anyone had any similar problems?

  2. #2
    Join Date
    Jul 2004
    Location
    Simi, Ca.
    Posts
    725

    Default

    Have you done a half test to see if an image is on the toner?
    The shutter for the scanner may not be actuating. Check the slot either actuated by the door, or the toner. Re-seat scanner cables.

  3. #3
    Join Date
    Aug 2009
    Location
    Southern Indiana (close to Louisville,KY)
    Posts
    2

    Smile 5035 blanks

    laser shutter is working as I went thru the system for that. have run stop test and coldrestart plus using test for bypassing formatter. looking at replacing laser unit.

    thanks
    Hoosierfarmboy

  4. #4
    Join Date
    Jul 2004
    Location
    Simi, Ca.
    Posts
    725

    Default

    Try the scanner not the laser. Do any test prints work?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •