Could it be that you have another device in your network with the same IP address?
Switch off the 4345 and Ping the IP address, if you get a reply there is another device using the same IP address.
Type: Posts; User: Brian
Could it be that you have another device in your network with the same IP address?
Switch off the 4345 and Ping the IP address, if you get a reply there is another device using the same IP address.
Does it really say 51.2K?
The last digit should be a 0, 1, 2 or 3.
You shouldn't post a question about a Canon in an HP forum and certainly not in a thread about another printer.
However .... the machine should be giving an error code, you should be able to look it...
Before you go spending money on a laser scanner check the sevice manual to see what the erorr indicates, 57.1 is a Printer fan error.
First thing you have to do is give us some more information.
Is it a grinding, knocking or squeaking sound?
Have you any idea where the sound comes from?
When do you hear the sound?
This problem can not have been caused by the Laser.
The card isn't screwed up, you need to get the settings (IP address, subnetmask etc) and enter them into the card through the menu on the printer.
Error 57 is a main motor problem, could be the motor itself or a cartridge that is running heavy.
Even the DC controller can be faulty, I'd try another cartridge first.
Menu is set to tray 4.
Delivery reports are printed from tray 4, that's the strange thing about it.
We have a problem with an HP Color Laserjet 4730mfp, it has been configured to print the faxes from Tray 4 (coloured paper) but faxes are still printed on white paper from other trays, the fax...
This series of printers has a custom/standard switch in the drawer, this can effect the print speed.
You'll need to set the IP address in the printer to one in the 192.168.2.xxx range, I would check (with ping) to see if 192.168.2.10 is free and set it to that.
Also check the subnet mask, that wil...
You need to have a basic knowledge of networks.
The printer must have an IP address that is within your range, to be sure your network can see the printer use the 'Ping' command.
Linda,
Ignore the pain in the neck :p , it could be the tray type settings that cause the paper to feed from a different tray.
If you don't need the settings for different types of paper they can...
The transfer roller and the guide that covers it are easy to pop out but if you are talking about a shaft that has two black arm then you are most likely looking at the Pickup roller assembly.
This...
Free manuals: http://www.feedroller.com/Store/hp_manuals.php
Sounds like the Feeder controller PCA (RG5-2673) needs replacing, you can find it at the right hand side of the tray slot towards the back, you'll need a bit of printer experience to replace it.
You don't need the service code for this.
You can reset the maintenance count by doing the following:
Shortly after turning on the printer (while memory is still being counted) press the Select...
From the HP 4000 service manual, page 8-40: RB1-8974-000CN, Clutch, Separation Roller
The clutch is indeed the RB1-8974-000CN, situated next to the roller in the tray.
The old style separation arm can be a bugger to swap but you only have to take of the front cover and tray one...
Printing can't be slowed down on the 5N, the fuser temperature can't be altered either.
Do you have stickers that are suitable for laser printers?
In my experience if a fuser in the 4000 is still working fine at 200,000 prints it has already been replaced at some time, if not you are lucky.
If you remove the fuser the printer doesn't do the...
The 'mountain of dusty paper' is most likely shavings from the gear that drives the fuser, you'll need to replace that, it's much easier to replace just that gear than the whole swing plate assembly....
I believe the original poster said that the rollers have already been changed.
13.1 is very often caused by the Separation clutch (RB1-8974 next to the lower roller), you can either replace it or...
49 is a firmware or formatter error, you could try to re-seat them, it might help, if not they'll need to be replaced.