PDA

View Full Version : HP 4 "50 Service" error



troygagnon
09-22-2006, 12:55 PM
I received this error and assumed it was a fuser. HP troubleshooting codes show error codes of 50.X Fuser, or 50.4 Whatever.

I replaced the fuser anyways and I continue to get the "50 Service" error which technically isn't in the troubleshooting guides.

I tried powering down and waiting 10 minutes then back up - no luck.

I will try reseating the fuser.

Any ideas?

Thanks.

Troy

redcow
09-23-2006, 01:40 AM
10 minutes isn't long enough. Give it 20 to be sure the cap discharges.
Could also be power supply.

MichaelTech
09-25-2006, 01:19 PM
As long as the power cord,and or NIC cable are plugged in, you may still be getting a trickle charge preventing correct discharge to clear the error.
Un-plug all and wait 15 minutes.

Wurzel.D
09-28-2006, 04:32 AM
It will still be getting a trickle charge if its still plugged in. 15-20min should do it.