PDA

View Full Version : "13.20" Error on HP 4200\4300



MichaelTech
06-08-2006, 09:44 AM
I recently posted on this, and have found the solution from Depo America.
The Registration Assy. Block - the plastic piece the registration sits on, has three sensors, and is a pain to replace. It entails complete dis-mantling of the unit, and attention must be given to the paper feed assy's flag spring.
All screws on the left side must be removed to pull out the frame and remove\install block. Replace screws from the back to the front to ensure alignment. Big job! Good Luck!